| Author |
|
Karthik
Joined: 02 Oct 2007
Posts: 6
|
 Posted: Wed 03 Oct '07 16:40 Post subject: Apache 2.2.6 /PHP 5.2.x on Windows Vista Home Premium |
 |
|
I am trying to install Apache 2.2.6 /PHP 5.2.x on Windows Vista Home Premium. I am encountering the following problem. Hereby I put the error info as well as the configuration details. I would be grateful
if someone light on to reslove the problem. I am keep debugging last three days with reading forum mails. But unable to do it... :cry:
when I run, Configure Apache server->test configuration :-
================================================
httpd.exe: Syntax error on line 486 of C:/Apache2.2/conf/httpd.conf: Cannot load
C:/php/php5apache2.dll into server: The specified module could not be found.
Note the errors or messages above, and press the <ESC> key to exit. 16...
When I ran, Control Apache server->start :-
==========================================
httpd.exe: Syntax error on line 486 of C:/Apache2.2/conf/httpd.conf: Cannot load
C:/php/php5apache2.dll into server: The specified module could not be found.
Note the errors or messages above, and press the <ESC> key to exit. 16...
Php5apache2.dll is available:-
==============================
C:\php>dir php5apache2.dll
Volume in drive C is ACER
Volume Serial Number is C8BA-2D89
Directory of C:\php
31/05/2007 09:42 AM 36,925 php5apache2.dll
1 File(s) 36,925 bytes
0 Dir(s) 31,838,400,512 bytes free
httpd.conf:-
=============
LoadModule php5_module "C:/php/php5apache2.dll"
PHPIniDir "c:/php"
AddType application/x-httpd-php .php
AddType application/x-httpd-php-source .phps
Win32DisableAcceptEx
If I changed to php5apache2_2.dll in httpd.conf, I could see
the cmd window closing immediately as soon as I start
either test configuraton / start. :oops: |
|
| Back to top |
|
James Blond
Moderator
Joined: 19 Jan 2006
Posts: 7442
Location: EU, Germany, Next to Hamburg
|
| Posted: Thu 04 Oct '07 9:13 Post subject: |
|
|
| Code: |
LoadModule php5_module "C:/php/php5apache2_2.dll"
PHPIniDir "c:/php"
AddType application/x-httpd-php .php
AddType application/x-httpd-php-source .phps
|
The php5apache2_2.dll is right for apache 2.2.x
try to start apache from the command line (cmd.exe) with
httpd -w
To see errors which might coming up. |
|
| Back to top |
|
Karthik
Joined: 02 Oct 2007
Posts: 6
|
| Posted: Thu 04 Oct '07 16:01 Post subject: |
|
|
C:\Users\user>httpd -w
'httpd' is not recognized as an internal or external command,
operable program or batch file.
httpd -w is not recongized.
Please guide me
 |
|
| Back to top |
|
Karthik
Joined: 02 Oct 2007
Posts: 6
|
| Posted: Thu 04 Oct '07 16:21 Post subject: |
|
|
| Karthik wrote: | C:\Users\user>httpd -w
'httpd' is not recognized as an internal or external command,
operable program or batch file.
httpd -w is not recongized.
Please guide me
|
I just removed the PHP related commands from httpd.conf.
I got the follwing error.
====>
(OS 10048)Only one usage of each socket address (protocol/network address/port)
is normally permitted. : make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down
Unable to open logs
Note the errors or messages above, and press the <ESC> key to exit. 27...
<============
when I see using netstat-n. I got the following
---------->
C:\Users\user>netstat -n
Active Connections
Proto Local Address Foreign Address State
TCP 127.0.0.1:10012 127.0.0.1:49373 TIME_WAIT
TCP 127.0.0.1:10012 127.0.0.1:49374 TIME_WAIT
TCP 127.0.0.1:10012 127.0.0.1:49375 TIME_WAIT
TCP 127.0.0.1:10012 127.0.0.1:49376 TIME_WAIT
TCP 127.0.0.1:10012 127.0.0.1:49377 TIME_WAIT
TCP 127.0.0.1:10012 127.0.0.1:49378 TIME_WAIT
TCP 127.0.0.1:10012 127.0.0.1:49379 TIME_WAIT
TCP 127.0.0.1:10012 127.0.0.1:49380 TIME_WAIT
TCP 192.168.1.122:49350 62.194.40.33:80 ESTABLISHED
TCP 192.168.1.122:49351 62.194.40.33:80 ESTABLISHED
TCP 192.168.1.122:49354 209.85.175.166:80 ESTABLISHED
TCP 192.168.1.122:49355 209.85.175.166:80 ESTABLISHED
TCP 192.168.1.122:49358 209.85.143.104:80 ESTABLISHED
C:\Users\user>
Is it possible to run apache2.2.6 without PHP ? I would like to up Apache first, then debug the includion of PHP |
|
| Back to top |
|
James Blond
Moderator
Joined: 19 Jan 2006
Posts: 7442
Location: EU, Germany, Next to Hamburg
|
| Posted: Thu 04 Oct '07 16:58 Post subject: |
|
|
Please see Programs that may causes apache not running
Of cause you can run apache without PHP if you don't need php.
try netstat -nb to find you which programm is listen on Port 80 if not listed in the List above. |
|
| Back to top |
|
Karthik
Joined: 02 Oct 2007
Posts: 6
|
| Posted: Fri 05 Oct '07 5:58 Post subject: |
|
|
C:\Users\user>netstat -nb
The requested operation requires elevation.
If I try to find out the program running on the ports, I am asked to give permission to run the command. I can do the same on Windows XP, But unable to do on Windows Vista program.
I am much worried abut running Apache on Vista possiblity. Please help me....  |
|
| Back to top |
|
Karthik
Joined: 02 Oct 2007
Posts: 6
|
| Posted: Fri 05 Oct '07 6:01 Post subject: |
|
|
| Karthik wrote: | C:\Users\user>netstat -nb
The requested operation requires elevation.
If I try to find out the program running on the ports, I am asked to give permission to run the command. I can do the same on Windows XP, But unable to do on Windows Vista program.
I am much worried abut running Apache on Vista possiblity. Please help me.... |
ne more info : If I change listening port number 80 to 801 and start, the command window is closing as soon as I run the start from control apache server |
|
| Back to top |
|
James Blond
Moderator
Joined: 19 Jan 2006
Posts: 7442
Location: EU, Germany, Next to Hamburg
|
| Posted: Fri 05 Oct '07 12:23 Post subject: |
|
|
| You may try with disabled UAC. |
|
| Back to top |
|
Karthik
Joined: 02 Oct 2007
Posts: 6
|
| Posted: Fri 05 Oct '07 16:26 Post subject: |
|
|
I got the statistics when I disconnected the internet
=================>
C:\Users\user>netstat -nb
Active Connections
Proto Local Address Foreign Address State
TCP 127.0.0.1:10012 127.0.0.1:49181 TIME_WAIT
TCP 127.0.0.1:10012 127.0.0.1:49182 TIME_WAIT
TCP 127.0.0.1:10012 127.0.0.1:49183 TIME_WAIT
TCP 127.0.0.1:10012 127.0.0.1:49184 TIME_WAIT
TCP 127.0.0.1:10012 127.0.0.1:49185 TIME_WAIT
TCP 127.0.0.1:10012 127.0.0.1:49186 TIME_WAIT
TCP 127.0.0.1:10012 127.0.0.1:49187 TIME_WAIT
TCP 127.0.0.1:10012 127.0.0.1:49188 TIME_WAIT
<========================
When I try to start under Control apache server, a command window is blinked a moment. I am still unable to start apache even without integrating PHP.
Please help me. Thanks in advance |
|
| Back to top |
|
